Call Us On
(91) 98 223 94981
FIE introduces its new model of Universal Testing Machine with design flexibility, a modern appearance and high performance electronics. Some of the features include
A static hydraulic technology is used to apply a tensile or compression load to the test specimen. Double acting cylinder operates crossheads precisely by using the hydraulic controls. Displacement is measured by an encoder and load is precisely measured using Load cell.
Typical HGFL design includes a rigid two column frame, open type crossheads with hydraulic wedge action grips and a double acting cylinder.
The control panel consists of a power pack with drive motor, oil tank and two separate manifolds with solenoid valves.
The power pack is a dual output type. The hydraulic pump provides continuously non - pulsating oil flow hence the load application is very smooth.
Hand operated wheels are used to control the flow to and from the hydraulic cylinder. The requlation of the oil flow is infinitely variable. Up and down direction of the crosshead and jaw actuation cylinders are by means of solenoid valve
Series Universal 2011 (TS) PLC based panel incorporating state of art technology with following features
The UNIVERSAL 2011 (TS) series control panel can be hooked to any PC using RS232 communication port. FIE offers different exhaustive application, windows based software packages with real time graph on PC to enable the user to effectively evaluated different parameters. The following features include :
FIE Electronic Universal testing machine is closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Machine is then calibrated over each of its measuring range in accordance with the procedure laid down in British standards 1610: Part1: 1992 and IS 1828: Part1: 1991
FIE Electronic Universal Testing Machine complies with Grade "AD of BS: 161 0:Part1 :1992 and class 1 ofIS-1828-Part1 :1991.
PC and Printer is not in our standard scope of supply.
|Load Resolution (20,000 counts full scale)||N||20|
|Resolution of Piston movement (Displacement)||mm||0.01|
|Clearance for tensile test at fully descended working piston||mm||500|
|Clearance between columns||mm||500|
|Straining/Piston speed (at no load)||mm/min||140 mm/min|
|Connected Load||-||3 HP, 400-440V, 3 Phase|
|Dimensions (L x W x H)||mm||2410 x 750 x 2910|
|Standard Accessories : For Tension test||-||-|
|Clamping jaws for round specimen of diameters||mm||10-30
|Clamping Jaws for flat specimen of thickness Width||mm||0-15
|For Compression test
Pair of compression plate of dia
Electronic Extensometer, Shear Test Attachment, Mechanical Extensometer.
FIE reserves the rights of change in the above specifications due constant improvement in design. The dimensions given above are all approximate.
Attachment for Tension Test for shouldered and threaded specimens
Attachment for Tension Test for Wire Ropes