logo
Hardness Testing Machines Series - RASNE
Request a Quote

Hardness Testing Machines Series - RASNE (For Rockwell, Rockwell Superficial & Brinell Testing)

Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.
RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.

Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto/manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.
Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High/Good/Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading/unloading cycle automatically & hardness is shown on LCD Display with High/Good/Low indication.

  • This is motorized machine having automatic loading/unloading cycle suitable for production testing.
  • The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine looks like new over year.
  • The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush.
  • A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy.
  • An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia.
  • These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy.
  • IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell Hardness Test.
Model
RASNE-1
RASNET-1
RASNEB-1
Testing Table 50mm dia.
1
1
1
Testing Table 38mm dia. with 'V' groove for round jobs 6-45 mm dia.
1
1
1
Diamond indentor - Rockwell RA
1
-
1
Diamond indentor - Rockwell SF
-
1
-
Steel Ball Indentor 1/16" with 5 spare balls
1
1
1
Steel Ball Indentor 2.5 mm with 5 spare balls
-
-
1
Test Block Rockwell "C"
1
1
1
Test Block Rockwell "B"
1
1
1
Test Block HB 2.5 / 187.5
-
-
1
Test Block HR 30 N
-
1
-
Allen Spanners
5
5
5
Screw Driver
1
1
1
Clamping Device
1
1
1
Wooden Box for Std. Accessories
1
1
1
Telescopic Sleeves for Elevating screw position
1 Set
1 Set
1 Set
Spare Fuse 1 Amp.
1
1
1
Power Cable
1
1
1
Brinell Microscope
-
-
1
Machine Cover
1
1
1
Instruction Manual
1
1
1
Model
Unit
RASNE-1
RASNET-1
RASNEB-1
Major Load
N
(kgf)
588.4, 980.7, 1471
(60, 100, 150)
147.1, 294.2, 441.3, 588.4, 980.7, 1471
(15, 30, 45, 60, 100, 150)
588.4, 980.7, 1471, 1839, 2452 (60, 100, 150, 187.5, 250)
Minor Load
N (kgf)
98.07 (10)
29.42, 98.07 (3, 10)
98.07 (10)
Max.Test height
mm
230
230
230
Depth of throat
mm
133
133
133
Net wt. Approx.
kg.
75
77
77
M/c Dimensions
mm
L-450, W-175, H-627
L-450, W-175, H-627
L-450, W-175, H-627
Model
RASNE-1
RASNET-1
RASNEB-1
Type Digital Rockwell Digital Rockwell & Rockwell Superficial Digital Rockwell cum Brinell
Operation Cycle Automatic Load/Dwell/Unload Automatic Load/Dwell/Unload Automatic Load/Dwell/Unload
Preliminary Test Force 98.07N (10 kgf) 29.42N (3kgf) & 98.07N (10kgf) 98.07 N (10kgf)
Additional Test Force 490.3, 882.6, 1373N (50, 90, 140 kgf) 177.7, 264.8, 441.9, 490.3, 882.6,
1373N (12, 27, 42, 50, 90, 140 kgf)
490.3, 882.6, 1373, 1471, 2354N
(50, 90, 140, 177.5, 240 kgf)
Total Test Force 588.4, 980.7, 1471N (60, 100, 150 kgf) 141.7, 294.2, 441.3, 588.4, 980.7,
1471N (15, 30, 45, 60, 100, 150 kgf)
5800.4, 980.7, 1471, 1839, 2452N
(60, 100, 150, 187.5, 250 kgf)
Test Force Selection By external dialing By external dialing By external dialing
Set Position With LCD bar indicator With LCD bar indicator With LCD bar indicator
Key Board Entry Through membrane switches for scale,
GO-No GO & dwell time selection
Through membrane switches for scale,
GO-ON GO & dwell time selection
Through membrane switches for scale,
GO-ON GO dwell time selection
Resolution 0.1 Rockwell 0.1 Rockwell or
0.1 Rockwell Superficial
0.1 Rockwell
Output Parallel output for connecting Dot Matrix
Printer to get results indicating serial no. of
tests, hardness scale, hardness value &
high/good/low indication
Parallel output for connecting Dot Matrix
Printer to get results indicating serial no. of
tests, hardness scale, hardness value &
high/good/low indication
Parallel output for connecting Dot Matrix
Printer to get results indicating serial no. of
tests, hardness scale, hardness value &
high/good/low indication
Optional Serial PD interface & windows software Serial PC interface & windows software Serial PC Interface & windows software for
only Rockwell scales

Note : For Brinell scale - manually select (187.5 or 250 kgf) with respected ball indentor. At that time take reference of set point only. Apply the load, then measure the impression dia by Brinell microscope only. (No Brinell scale display on screen).

  • Steel Ball Indentor 1/8", 1/4", 1/2"
  • Testing Table 200mm dia.
  • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia.
  • Vari-rest to support odd shaped jobs.
  • Jominy test fixture for end quench test.
  • Gooseneck Adopter No.1
  • Special Diamond Indentor suitable for Gooseneck Adopter No.1
  • Short nib diamond indentor suitable for Gooseneck Adopter No. 1
  • Gooseneck Adopter No. 2
  • Special Diamond Indentor suitable for Gooseneck Adopter No.2
  • Gooseneck Adopter No. 3
  • Raised centre testing table 15mm dia.
  • Diamond spot anvil.
  • Cylindron anvil for testing big jobs above 20mm dia.
  • Eyeball anvil with 25.4mm dia or 38mm dia. ball
  • Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts
  • Jack rest for long and heavy jobs.

Products